Using BlackBerry As Modem

HOW TO: BlackBerry As Modem For Laptop

Introduction.

1. Connect Your BlackBerry Make sure your BlackBerry is connected by USB cable, and your BlackBerry Handheld Manager is running (just launch BlackBerry Desktop to run it.) This is necessary for using the BlackBerry as an external modem. You cannot use BlackBerry as a modem unless you have BlackBerry Handheld Manager running in the background! Note: For a Bluetooth modem connection on new Curve devices the BlackBerry Manager does not have to run in the background for the connection to work. You need to simply pair your laptop and the Curve.
   
   .

2. Verify The Modem Driver Is Functioning
   Go to Control Panel -> Phone
   
   & Modem Options. In the Modems tab, you should see a new Standard Modem on a new port (such as COM6 or COM11). Click Properties -> Diagnostics -> Query Modem. You should see the following:Quote:
   

   ATQ0V1E0 - OK
   AT+GMM - BlackBerry IPmodem
   AT+FCLASS=? COMMAND NOT SUPPORTED
   AT#CLS=? COMMAND NOT SUPPORTED
   AT+GCI? COMMAND NOT SUPPORTED
   AT+GCI=? COMMAND NOT SUPPORTED
   ATI1 - Research In Motion / BlackBerry IPmodem
   ATI2 - Research In Motion / BlackBerry IPmodem
   ATI3 - Research In Motion / BlackBerry IPmodem
   ATI4 - Research In Motion / BlackBerry IPmodem
   ATI5 - Research In Motion / BlackBerry IPmodem
   ATI6 - Research In Motion / BlackBerry IPmodem
   ATI7 - Research In Motion / BlackBerry IPmodem

   Note: This may look different on Nextel 7520, or Sprint/Verizon/Bell Mobility 7250. This is normal. Just make sure there is a response at all, rather than no response.
   
   
   .
   
3. IMPORTANT SPECIAL CONFIGURATION STEP
    
4. Click Properties -> Advanced. Add only ONE of the following Extra initialization commands with the appropriate carrier-specific APN Setting:
   
   • For Vista users only: Under Control Panel>Phone and Modem>Properties on the General Tab, click "Change Settings". After giving Administrator approval, click the Advanced tab. There, enter the appropriate APN settings for your carrier as noted below.
   
   TMOBILE USA Users (Success!)
   +cgdcont=1,"IP","wap.voicestream.com"
   This is a newer string from TMO that works: +cgdcont=1,,"wap.voicestream.com"
   Another alternate string (required for BlackBerry 8100 Pearl & BlackBerry 8800): +cgdcont=1,"IP","wap.voicestream.com"
   
   Rogers Users (Success!)
   +cgdcont=1,"IP","internet.com"
   
   Cingular Blue/AT&T Users (Success!)
   +cgdcont=1,"IP","proxy"
   
   Cingular Orange Users (Success!)
   +cgdcont=1,"IP","ISP.CINGULAR"
   
   at&t Users (Success!)
   AT+cgdcont=1,"IP","WAP.CINGULAR"
   
   UK Vodafone Users (Success!)
   +cgdcont=1,"IP","internet"
   
   SwissCom Users (Success!)
   +cgdcont=1,"IP","gprs.swisscom.ch"
   
   Verizon Users (Success!) - Keep blank
   Nextel/Telus iDEN Users (untested) - Keep blank
   Sprint/Bell Mobility CDMA Users (untested) - Keep blank
   .
5. Add A New Internet Connection
   Close the Phone and Modem Options and the Control Panel.
   For XP: Create a new connection with Start -> Connect To -> Show all connections -> Create a new connection.
   

   1. Click Next
   
   2. Select "Connect To The Internet" then Next
   
   3. Select "Set up my connection manually" then Next
   
   4. Select "Connect using a dial-up modem" then Next.
   

   For Vista: Create a new connection with Start -> Connect To ->
   
   
   

   1. Set up a connection or network
   
   2. Choose a connection option: Click on "Connect to the Internet (Set up a wireless, broadband, or dial-up connection to the Internet."
   
   3. You are already connected to the Internet - Click on "Set up a new connection anyway"
   
   4. At "How do you want to connect?" Click on "Dial-up"
   
   

   5. Check only the Standard Modem (if prompted).
   
   6. Give the connection a name such as "BlackBerry Modem", then Next.
   
   7. On the next screen, pick one of the following phone numbers, depending on your carrier:
   ....If you use GSM/Cingular/AT&T/TMobile/SwissCom: Enter phone number *99#
   ....If you use iDEN/Nextel/Telus: Enter phone number S=2
   ....If you use CDMA/Verizon/Sprint/Bell Canada: Enter phone number #777
   
   8. Click Next.
   
   9. On the next screen, pick one of the following, depending on your carrier:
   
   ....If you use Cingular Blue, AT&T or Nextel:
   .........Username: (blank)
   .........Password: (blank)
   
   ....If you use Rogers Canada:
   .........Username: wapuser1
   .........Password: wap
   
   ....If you use Cingular Orange:
   .........Username: ISPDA@CINGULARGPRS.COM
   .........Password: CINGULAR1
   
   ....If you use T-Mobile:
   .........Username: (Your TMobile 10-digit phone number)
   .........Password: (Your existing TMobile.com Password)
   .........Note: In USA, you can leave both blank
   
   ....If you use Verizon, replace 8005551212 with your phone number:
   .........Username: 8005551212@vzw3g.com
   .........Password: 8005551212
   
   ....If you use Sprint:
   .........Username: (Your existing Sprint PCS Username)
   .........Password: (Your existing Sprint PCS Password)
   
   ....If you use Bell Mobility, replace 8005551212 with your phone number:
   .........Username: 8005551212@1x.bell.ca
   .........Password: (Your Bell Mobility Voicemail PIN)
   
   ....If you use Swisscom:
   .......The connection can be established anonymously, however some devices need data in those fields, if that's the case, use:
   .........Username: gprs
   .........Password: gprs
   
   10. Clear all checkboxes ("Use...when anyone..." and "Make this the default...")
   
   11. Click Finish

   .
6. Disable IP Header Compression (*Vista users, see the note below)
   Make sure TCP/IP Properties (Advanced) "Use IP Header Compression" checkbox is NOT checked. To verify this, do these steps:
   

   1. Start Menu->Network Connections->"BlackBerry Modem"
   2. Click Properties Button
   3. Click Networking Tab
   4. Select "Internet Protocol (TCP/IP)"
   5. Click Properties Button
   6. Click Advanced... Button
   7. Disable "Use IP header compression" checkbox
   8. Click all OK buttons to close all dialogs

   Also make sure you clear all these checkboxes, if you see any of these checked:
   Turn off "Enable Hardware Flow Control"
   Turn off "Enable Modem Error Control"
   Turn off "Enable Modem Compression"
   
   
   • For Vista users only: Under the Network and Sharing Center, click "Manage Network Connections". When the Network Connections screen is visible, you should have the Blackberry Modem connection you created. Right click the Blackberry Modem and select "Properties". Under the Properties screen on the General tab, select the "Configure" button. Ensure that ALL check boxes are unchecked. Select "OK" to exit the screen. Under the Networking tab, select the properties for the Internet Protocol Version 4 (IPV4). On the Properties screen, select the "Advanced" button. Ensure that "Use IP Header Compression" is unchecked. Select OK to exit the screen.
   .
   
7. BES Configuration
   Skip this step if you are not on BES. You only need to follow this step if your company gave the BlackBerry to you. If you are at a company and you are on a BES 4.0, your Administrator must enable the "BlackBerry IPModem" setting on the BES. This is a new setting in the Version 4.0 of BES.
   .

8. Surf On The Laptop!
   Connect to the Internet on the laptop by clicking the "BlackBerry Modem" icon via Start Menu->Network Connections. No username or password is needed.
   Insert non-formatted text here